Demander un Devis
| range of product |
Harmony Relay
|
|
|---|---|---|
| product or component type |
Solid state relay
|
|
| Provided accessory |
Thermal pad
|
|
| device short name |
SSP1
|
|
| mounting support |
Panel
|
|
| Number of phases |
1 phase
|
|
| Contacts type and conifguration |
1 NO
|
|
| [In] rated current |
75 A
|
|
| solid state output type |
Zero voltage switching
SCR output |
| [Uc] control circuit voltage |
4…32 V DC
|
|
|---|---|---|
| minimum switching voltage |
4 V DC turn-on
|
|
| maximum switching voltage |
1 V DC turn-off
|
|
| response time |
0.5 cycle (turn-on)
0.5 cycle (turn-off) |
|
| Input current |
7…12 mA
|
|
| output voltage |
48…660 V AC
|
|
| load current |
0.15…75 A
|
|
| Transient overvoltage |
1200 V
|
|
| surge current |
1000 A for 16.6 ms
|
|
| maximum I²t for fusing |
4150 A².s for 8.33 ms at 60 Hz
4555 A².s for 10 ms at 50 Hz |
|
| Co-ordination type |
Type 1 – 50 A miniature circuit breaker (MCB) – curve B
Type 2 – 40 A miniature circuit breaker (MCB) – curve B |
|
| maximum leakage current |
1 mA off-state
|
|
| maximum voltage drop |
<1.15 V on-state
|
|
| dV/dt |
500 V/µs off-state at maximum voltage
|
|
| Power factor |
0.5 (with maximum load)
|
|
| Motor controller rating |
1.5 hp 120 V AC
3 hp 240 V AC 7.5 hp 480 V AC |
|
| insulation resistance |
1000 MOhm at 500 V DC
|
|
| Maximum capacitance |
8 pF for input/output
|
|
| dielectric strength |
4 kV AC for input/output
4 kV AC for input or output to case |
|
| [Uimp] rated impulse withstand voltage |
6 kV output to case
6 kV input to output |
|
| tightening torque |
1.5…1.7 N.m for input
2…2.2 N.m for output |
|
| connections – terminals |
Screw terminals: 0.2…3.3 mm², (AWG 24…AWG 12) with cable end for input
Screw terminals: 0.5…5.26 mm², (AWG 20…AWG 10) with cable end for output Screw terminals: 0.2…3.3 mm², (AWG 24…AWG 12) without cable end for input Screw terminals: 0.5…8.26 mm², (AWG 20…AWG 8) without cable end for output Forked type tag connectors: 9.2 x 4 mm for input Ring lugs: 9.2 x 4 mm for input Forked type tag connectors: 11.7 x 4.5 mm for output Ring lugs: 11.7 x 4.5 mm for output |
|
| Thermal resistance |
0.3 °C/W junction to case
|
|
| thermal pad impedance |
0.48 °C-in²/W at 25 psi
|
|
| LED indicator |
LED, green for input
|
|
| IP degree of protection |
IP20
|
|
| safety reliability data |
B10d = 1731395
MTTFd = 1875.9 years |
|
| net weight |
89.2 g
|
|
| device presentation |
Complete product
|
Avis
Il n’y a pas encore d’avis.